|
|
iSpring FP15X50 5 Micron Box of 50 10"x2.5" Standard Sediment Water Filter Replacement Cartridges, 50-Pack
About this item
- Made of 100% Melt-Blown Polypropylene, multi-layer filtration. This filter can also be used for pool and hottub.
- Diameter 2.5" x 10" Length
- 5 Micron - 50 filters included
- Fits 10" filter housings
- Tested by independent third-party to meet NSF/ANSI standard
Share
Frequently Bought Together
iSpring FP15X50 5 Micron Box of 50 10"x2.5" Standard Sediment Water Filter Replacement Cartridges, 50-Pack
iSpring Universal PP Sediment Filters
Different water filters have different purposes. Some are designed to remove chemicals from water. Others remove metallic contaminants, dissolved solids, or charged particles. Polypropylene sediment filters are usually placed as the first stage of the water filtration system to remove suspended solids, variously referred to as turbidity, sediment, or particulate.
PP sediment filters are widely used as beds of natural media like garnet, sand, and anthracite to filter out unwanted particles like dirt and iron rust.
In general, flow rates for sediment filters are higher than equally sized carbon or media filters. The tighter the filter is, the slower the flow will be. iSpring provides a wide variety of micron sizes to suit your specific need.
Inner Spiral Pattern
Evenly separated spiral pattern increases pressure resistant, filtration area, and water flow.
Multilayered Structure
Sparse Layer: Large particles are filtered to extend the filter life.
Compaction Layer: Made with fine fiber and filters smaller particles that passed through the sparse layer.
Precision Layer: Small dust is filtered to assure efficiency of water filtration process in the following stages.
High Quality Material
iSpring sediment filters are manufactured to comply strictly with FDA standard (CFR - Part 177) and tested by independent third party against NSF/ANSI standard for material safety and water quality. (NSF/ANSI 42, by NSF International, 10/2018)
Product Description
Reduction of Sediment
- It is usually the first filter in a water filtration system. The main function is for the reduction of sediments, such as sand, dirt, silt, rust, and various fine particles that even can't be seen by naked eyes. 100% MELT-BLOWN POLYPROPYLENE
- Sediment filters are made of fine melted polypropylene, which is then blown and spun in a cylinder-like form. It is physically strong and resists chemicals and corrosion. Tested by independent third-party to meet NSF/ANSI standard
- Well Packaged
- Each cartridge is individually wrapped with manufacturing date Micron rating: 5 Micron Dimensions: 10" x 2.5" Capacity: 15,000 gallons Replacement schedule: 1-4 times a year, depending on the water quality.
- Availability: In Stock
- Model: FP15X50
- Manufacturer: iSpring
Reviews with images
Write Review
-
iSpring FP15X2 5 Micron 10"x2.5" Standard Sediment Water Filter Replacement Cartridge, 2-Pack
$28.99 -
iSpring FP15 5 Micron 10"x2.5" Standard Sediment Water Filter Filter Cartridges
$18.99 -
iSpring CKC2 2-Stage Countertop Water Filtration Dispenser System- Includes Activated Carbon and Carbon Block Filters
$79.99 -
iSpring FP15X4 5 Micron 10" x 2.5" Standard Sediment Water Filter Replacement Cartridges, 4-Pack
$38.99 -
iSpring WGB32B Whole House Water Filter System, Highly Reduces Sediment, Taste, Odor, and up to 99% Chlorine, 3-Stage w/ 20-Inch Sediment and Carbon Block Filters, 1" Inlet/Outlet
$516.99 -
iSpring FP15X8 5 Micron 10"x2.5" Standard Sediment Water Filter Replacement Cartridges, 8-Pack
$49.99 -
iSpring WSP Reusable Whole House Spin Down Sediment Water Filter, 1" MNPT 3/4" FNPT w/Push to Connect Fittings, Lead-Free Brass
$46.54 -
iSpring RO500-BN, NSF Certified Tankless RO Reverse Osmosis Water Filtration System, 500 GPD Fast Flow, Brushed Nickel Faucet, 2:1 Pure to Drain Ratio, White
$631.99
Warranty Registration & Help Center
Tell us about your shopping experience
