iSpring FP110X50 10 Micron Box of 50 Standard 10"x2.5" Sediment Water Filter Replacement, 50-Pack

iSpring Universal PP Sediment Filters

Different water filters have different purposes. Some are designed to remove chemicals from water. Others remove metallic contaminants, dissolved solids, or charged particles. Polypropylene sediment filters are usually placed as the first stage of the water filtration system to remove suspended solids, variously referred to as turbidity, sediment, or particulate.

PP sediment filters are widely used as beds of natural media like garnet, sand, and anthracite to filter out unwanted particles like dirt and iron rust.

In general, flow rates for sediment filters are higher than equally sized carbon or media filters. The tighter the filter is, the slower the flow will be. iSpring provides a wide variety of micron sizes to suit your specific need.

Inner Spiral Pattern

Evenly separated spiral pattern increases pressure resistant, filtration area, and water flow.

Multilayered Structure

Sparse Layer: Large particles are filtered to extend the filter life.

Compaction Layer: Made with fine fiber and filters smaller particles that passed through the sparse layer.

Precision Layer: Small dust is filtered to assure efficiency of water filtration process in the following stages.

High Quality Material

iSpring sediment filters are manufactured to comply strictly with FDA standard (CFR - Part 177) and tested by independent third party against NSF/ANSI standard for material safety and water quality. (NSF/ANSI 42, by NSF International, 10/2018)

Product Features

• Typically the first stage for any water filtration system, the sediment filter removes dirt, rust, sand, and other particles from the water.
• Made of 100% Melt-Blown Polypropylene, multi-layer filtration.
• Depending on your water usage and quality, it should be replaced every 3-6 months.
• ANSI/NSF STANDARD 42 COMPLIANT COMPONENT - Tested by independent third-party. Genuine iSpring filter sold directly by the manufacturer. Performance and quality guaranteed.
• Fits standard 10" filter housings, including most name brand models.
• WELL PACKED and individually wrapped

Product Highlights

• Tested by independent third-party to meet NSF/ANSI Standard
• Made of 100% Melt-Blown Polypropylene, multi-layer filtration
• Fits standard 10" housings, including name brand models

Specifications & Dimensions

• Micron rating: 10 Micron
• Length: 10", O.D. = 2.5", I.D.= 1"
• 1/4" Fitting
• Weight: 0.4 LBS/EACH