|
|
iSpring FP11X50 1 Micron Box of 50 10"x2.5" Standard Sediment Water Filter Replacement, 50-Pack
About this item
- 2.5-Inch by 10-Inch
- Made of 100% Melt-Blown Polypropylene, multi-layer filtration
- 1 Micron
- Fits 10-Inch filter housings
- Tested by independent third-party to meet NSF/ANSI standard. This filter can also be used for pool and hottub.
Share
Frequently Bought Together
iSpring FP11X50 1 Micron Box of 50 10"x2.5" Standard Sediment Water Filter Replacement, 50-Pack
iSpring Universal PP Sediment Filters
Different water filters have different purposes. Some are designed to remove chemicals from water. Others remove metallic contaminants, dissolved solids, or charged particles. Polypropylene sediment filters are usually placed as the first stage of the water filtration system to remove suspended solids, variously referred to as turbidity, sediment, or particulate.
PP sediment filters are widely used as beds of natural media like garnet, sand, and anthracite to filter out unwanted particles like dirt and iron rust.
In general, flow rates for sediment filters are higher than equally sized carbon or media filters. The tighter the filter is, the slower the flow will be. iSpring provides a wide variety of micron sizes to suit your specific need.
iSpring sediment filters are compatible with most water filtration systems' housing on the market.
FP11: 10", 1 micron
P15: 10", 5 micron
FP110: 10", 10 micron
FP120: 10", 20 micron
FP25: 20", 5 micron
FP15B: 10", 5 micron
FP220B: 20", 20 micron
Inner Spiral Patternn
Evenly separated spiral pattern increases pressure resistant, filtration area, and water flow.
Multilayered Structure
Sparse Layer: Large particles are filtered to extend the filter life.
Compaction Layer: Made with fine fiber and filters smaller particles that passed through the sparse layer.
Precision Layer: Small dust is filtered to assure efficiency of water filtration process in the following stages.
High Quality Material
iSpring sediment filters are manufactured to comply strictly with FDA standard (CFR - Part 177) and tested by independent third party against NSF/ANSI standard for material safety and water quality. (NSF/ANSI 42, by NSF International, 10/2018)
- Availability: In Stock
- Model: FP11X50
- Manufacturer: iSpring
Reviews with images
Write Review
2018-01-21
I have installed the filters and they work well. the price was significantly lower than the other filters I have purchased but they are just as good.
2017-10-29
All worked as expected and glad that. I purchased. For a little trimming to fit the value is great. Will be purchasing again.
2017-04-16
I have used these filters for about 3 years. We use well water and the individual filters last about 3-4 weeks between changes. With the 1-Micron iSpring filters, we have always had perfectly clear water with no visible particles. I very recently ordered another case of the filters and will continue to use them, as long as theyre available. I will continue to recommend these 1-Micron bulk household water filters to my friends.
Warranty Registration & Help Center
Tell us about your shopping experience
